Vangear CRX-Pod 2.3 campervan fridge pod - Black or Carbon Grey (fridge not included)

Vangear CRX-Pod 2.3 Campervan Pod for CRX50 or NRX50 fridges - Carbon Grey or Black

• Fully assembled and ready to fit
• 2-3 week lead time
• (Not including the fridge) Fits most 50L sized fridges (e.g. Dometic CRX50/NRX50, Alpicool THQ50/CR50X and many others)
• Updated design featuring a neater rear back panel, rear leg storage, rear belt holders and rear hooks.
• New oak veneer ply option for lid and table

The Vangear CRX-Pod is a universal fitment into many campervans and includes bolts which can be used to bolt the CRX-Pod to the floor of your van, we also have a range of cleats if your van has floor rails. The versatile, compact and lightweight pod has the following features - room for a Dometic CRX50 or NRX50 type fridge (fridge not included), a table/lid, a stove shelf (stove not included), a cordless tap and self-contained plumbing.

Features

• Fully assembled & ready to fit
• Door to the left or the right
• Carbon Grey or Black Hex panels 
• Anodised aluminium trim
• Table/lid - the lid becomes the table (the leg needs to be fitted) - available in  Carbon Grey, Driftwood, Black Hex or Oak Veneer Ply 
• Option for side door on the left or right (looking from the front)
• Plug & play with integrated plumbing & cordless tap
• Sink with self contained plumbing and auto-feeding cordless smart tap with an internal battery and pump which allows cordless fitting and also allows use outside. The smart tap can be recharged via USB (the tap needs to be fitted)
• Water bottle 5L 
• Waste bottle 5L
• To fit Dometic NRX50 fridge Also fits many other 50 litre fridges that are based on this size e.g. Dometic CRX50, Alpicool CR50X / AD50, Just Kampers JKF50, Vitrifrigo c51i
• Stove shelf for generic camping stove e.g. Outwell Appetizer, Campingaz Bistro, Kemper Xtra Smart (33cm wide) etc (stove NOT included) - no conventional gas bottle type installation needed
• Storage hooks & storage for the table leg on the rear of the pod
• Universal fit with bolts supplied or optional anchor/cleats
  

Dimensions

660mm length  425mm depth  720mm height

Fitting Options

• Standard M8 bolts for universal fitment (included)
• Short Unwin rail section (50cm) + fixings to make the pod removable on plywood floor
• J-bolts for securing our units to seat brackets (e.g. VW Kombi/Shuttle, Ford Tourneo and also Alphard rails)

Cleats/anchors to secure units to sliding rails:

Link for sliding rail fixings

• VW rail cleats (e.g. T5/T6/T6.1 Caravelle/Beach)
• Mercedes rail cleats (Vito Tourer, V-Class, Marco Polo Horizon - also compatible with the Nissan Elgrand)
• Citroen Spacetourer rail cleats (these also work in the Peugeot Traveller & Toyota Proace Verso)
• VW T7 Multivan rail cleats
• Clips to secure units to Unwin rails 

Follow this link for more info on fitting kit options 

Other options:

• Flat countertop with no sink/plumbing (=£525 - call/email to order)
• External rear bottle storage holder (+£39)
• NRX 50E Compressor Fridge features
  • Reliable compressor fridge
  • Reversible door hinge; allow to be fitted left or right as required
  • Energy-efficient variable speed compressor that reduces power consumption
  • Dual function locks can act as vents for your fridge
  • Frameless door with black front panel and full-width handle
  • Standard or flush-mount installation frame available as accessory
  • Beveled rear side for maximal utilisation of space on board

Also fits many other 50 litre fridges that are based on this size e.g. Dometic CRX50, Alpicool CR50X / AD50, Just Kampers JKF50, Vitrifrigo c51i

Concept

• High quality build and innovative features
• Stylish design and practical
• Fully assembled, ready to go in a good value package
• Universal fitment into many camper vans VW T4 T5 T6 Vito Transit etc
• Fitment to sliding seat rail systems with our optional Vangear anchor cleat ie VW Caravelle, California, Multivan
• Reduced fitting times and easy to fit

Our Fitment Support Guarantee

In the event of problems fitting your pod we will:

• Help with technical advice
• Help you with any fitting adaptors/ extra mounting plates
• In the unlikely event that the unit does not fit - A 30 day return policy
• We also provide a 1 year warranty on parts

Delivery and Collections

• Designed and manufactured by Vangear exclusively in East Sussex, UK
• Units are made to order and can be delivered on a pallet to your home or collected from our workshop.
  
• £55 delivery fee
• If selecting local pickup at checkout, items are typically ready for collection in 2-3 week. We'll notify you when your order is ready for pickup.
• We offer a 30 day return policy (excluding postage) 
• Watch our videos for more information
• View our units at our Ditchling (East Sussex) workshop (appointment please)
• Call or email us for more information info@vangear.co.uk 01444 247129  07810592353